Brian Street, Senior Technician at BenchMagic Electronic Services Inc required NKK switch caps laser engraved and black paint filled for the control panel he is building for BC Ferries.
First of all, it was a time bound and high quality controlled project. Because each cap is only 21mm x 15mm in size, made of 1/16″ thick polycarbonate. Almost all caps have different identification markings on them. Even some caps have 4 lines to laser etch – like “Rad steer Pump #1A/B”. Due to very small size of the caps, letter size for engraving had to be reduced to fit all 4 lines on each cap. Most of all we have to make sure that letters like A, P, R should not be completely filled with paint. After some R&D, testing and approved by Brian, the switch caps laser engraved successfully. After laser engraving we filled the engraved letters with a solvent based black paint. Delivered this job before deadline. Even a group of caps which were not ordered before, we were able to do in short span of 1 day.
He commented in his email later “Turned out very well! Thanks for all the rush work and the personal delivery. It made the work progress that much easier!”. Good job Brian.
Let us know if you want to mark your switch caps or other items for better identification.
IKEA Coquitlam emailed us asking if we are interested in a laser engraving project for them. They are hosting an annual co-worker catalog kick-off party in July 2016. They were
Laser engraved wood slabs Panabode Company, Richmond BC. Cut out from a big log, these slabs have the profile of the log the company is using to build log homes.
Wood engraving is a complex, but beautiful process. When you receive your wooden product that has been engraved, you may notice that the darkness of the layer below is not consistent. Well, we are here to answer all of your questions about wood engraving.
We personalized cork rollers for our Canadian Athletes who participated in summer Olympic at Rio 2016. Recently Corkit Manufacturing, Vancouver BC Canada contacted us
NKK switch caps laser engraved black paint filled
Brian Street, Senior Technician at BenchMagic Electronic Services Inc required NKK switch caps laser engraved and black paint filled for the control panel he is building for BC Ferries.
First of all, it was a time bound and high quality controlled project. Because each cap is only 21mm x 15mm in size, made of 1/16″ thick polycarbonate. Almost all caps have different identification markings on them. Even some caps have 4 lines to laser etch – like “Rad steer Pump #1A/B”. Due to very small size of the caps, letter size for engraving had to be reduced to fit all 4 lines on each cap. Most of all we have to make sure that letters like A, P, R should not be completely filled with paint. After some R&D, testing and approved by Brian, the switch caps laser engraved successfully. After laser engraving we filled the engraved letters with a solvent based black paint. Delivered this job before deadline. Even a group of caps which were not ordered before, we were able to do in short span of 1 day.
He commented in his email later “Turned out very well! Thanks for all the rush work and the personal delivery. It made the work progress that much easier!”. Good job Brian.
Let us know if you want to mark your switch caps or other items for better identification.
Related Posts
Chopping Boards laser engraved for IKEA
IKEA Coquitlam emailed us asking if we are interested in a laser engraving project for them. They are hosting an annual co-worker catalog kick-off party in July 2016. They were
Laser engraved wood slabs Panabode
Laser engraved wood slabs Panabode Company, Richmond BC. Cut out from a big log, these slabs have the profile of the log the company is using to build log homes.
The Science Behind Wood Engraving
Wood engraving is a complex, but beautiful process. When you receive your wooden product that has been engraved, you may notice that the darkness of the layer below is not consistent. Well, we are here to answer all of your questions about wood engraving.
Personalized cork rollers for Canadian Athletes
We personalized cork rollers for our Canadian Athletes who participated in summer Olympic at Rio 2016. Recently Corkit Manufacturing, Vancouver BC Canada contacted us